Four Issues Involved In Proofing Glass Bottles

Whether the bottle design of the glass bottle matches the material quality, production equipment, mold manufacturing, etc., so we usually look at the proofing problem. First, the proofing party must understand what grade their product is, what are the special requirements for physical and chemical properties and appearance, It is to understand the quality of the products produced by the producer. See if the manufacturer can produce glass bottles of the same quality as the proofer.

1. Glass bottle mold cost problem

If it is an ordinary mold, it is about 1500-2000 yuan. If it is a glass bottle, it is required to have a good appearance and the dimensional deviation is very strict. It is recommended to use a spray welding mold. The price is nearly doubled. After thousands of molds, if they fail the proof several times, they will lose money. The main reason is that the wasted production time is too expensive. In fact, the mold cost is not what the manufacturer wants, it is collected by the mold factory.

Especially for special-shaped bottles, many products can only pass qualified samples after many improvements. Or the technology used is not the same, the equipment is not the same, it may be difficult to make the same product with different equipment.

Many domestic Glass Wine Bottles are produced by imported equipment. If you need to find a professional manufacturer in this regard, then the price. With the improvement of China's economic level, our labor costs have increased a lot, compared to developed countries It is okay, but it is high for less developed countries. Especially in recent years, the labor cost has risen and coal and natural gas have risen. Transportation costs have risen, and unit prices of products have increased a lot. (Maybe due to the support of tax refund is ok) Domestic prices for conventional products are quite fierce. Therefore, we have a good mentality when making products. Good quality products must have higher prices, and lower price products are of equal quality.

Glass Wine Bottles

2. Material quality

If the bottle requires good quality materials, and the requirements are to achieve medicinal glass material quality, it is best to produce in a qualified glass factory, so that at least the physical and chemical properties meet the requirements. Now for molded bottles: most are small-capacity injection bottles and large-capacity Cosmetic Bottles And Containers. Brown bottles are mainly syrup oral liquid bottles.

If the appearance is required, the transparency of the bottle is very good, and the finish is very good, you can choose high white or some crystal white, mainly high-end wine bottles, like Wuliangye, gold wine bottles. There is also a bottle of the daily chemical series, but the physical and chemical properties of such products are worse than that of the medicinal materials, and some of them will rupture at high temperatures, and some indicators exceed the specifications.

3. Making and price of glass bottles

If it is a glass bottle with a capacity of 250-300 ml, it is recommended to use a drip machine, most of them are 6 orders or 8 orders. If the capacity is 250-50 ml, it is recommended to use a double drop machine, most of them are 6 pairs or 8 pairs. If the volume is 50-5 ml, there are now 3 drops and 4 drops in China. 5 drops, 6 drops of equipment, this requires a large number

4, glass bottle proofing time:

Now in the market economy, each glass bottle factory is competing with each other, and they want to get more orders to have better profits. If they are salesmen, they definitely want to receive more orders. The better Glass Bottle Manufacturer has a detailed review process for orders, but the review may take longer.

The above are the four problems involved in the proofing of glass bottles, I hope to help everyone.